The Filter Box Company.

Products.

THE FILTER BOX MODULAR EXPANSION SYSTEM.

SIZING GUIDE

The following guide is designed to give you an idea of which size Filter Box would generally be required to suit your filter set-up.

As installations can vary considerably, an additional check can be made by using the dimensions supplied.

  • MODEL A will usually fit one large sand/cartridge filter, motor, pump and chlorinator.
  • MODEL A+XB will usually fit the same as MODEL A plus a solar heating pump.
  • MODEL A+XC will usually fit a large filter and up to four pumps, including solar spa blower etc

 

PLANNING  TO ADD SOLAR HEATING?

The Filter Box Company’s unique design utilizes a modular expansion system. This means that there is a Filter Box Company product to suit most types of pool equipment.  Planning on adding solar heating? No Problem! Simply by purchasing additional modular panels, the basic filter Box (Model A) can actually be expanded in stepped up sizes to any required width to accommodate any extra motors/pumps without having to purchase an entirely new filter box like you would with many other brands. To determine which one of our  quality acoustically engineered pool filter enclosures suits your needs please look at our sizing guide. If our standard size doesn’t suit your requirements all models shown are available in a 1300H and 900D variety.

Contact us today for more information

Known for our quality service, The Filter Box Company has been a respectable manufacturer since 1987.

Our friendly staff are happy to answer any of your questions.

Give us a call at +61 2 9899 2080 during business hours or use the form on this page to send us a message and someone will get back to you as soon as possible.

MODEL A
(The basic unit)

Internal Dimensions: 1050W x 1000D x 1100H

External Dimensions: 1100W x 1100D x 1150H

Approx. Weight 66 kg

MODEL A+XB
(Basic unit plus XB expansion)

Internal Dimensions: 1500W x 1000D x 1100H

External Dimensions: 1550W x 1100D x 1150H

Approx. Weight 73 kg

MODEL A+XC
(Basic unit plus XC expansion)

Internal Dimensions:
2125W x 1000D x 1100H
External Dimensions:
2175W x 1100D x 1150H
Approx. Weight 108 kg

MODEL A+XCB
(Basic unit plus XCB expansion)

Internal Dimensions:
2550W x 1000D x 1100H
External Dimensions:
2610W x 1100D x 1150H
Approx. Weight 116 kg

MODEL A+XCC
(Basic unit plus XCC expansion)

Internal Dimensions:
3165W x 1000D x 1100H
External Dimensions:
3225W x 1100D x 1150H
Approx. Weight 158 kg

SIDE ENTRY

All of our standard filter boxes can be supplied with ‘side entry panels’ giving a greater amount of access to equipment if or when needed.

PUMP STAND

When space is at a premium the Filter Box Company can also supply pump/motor stands for a small additional charge.  These may come in handy when there is a need for more equipment to be installed into a smaller area through the use of available vertical space.

WxDxH=545x285x545mm

EXTRA TIMBER PANELS

Should you require more room for mounting electrics the Filter Box Company can provide additional timber panels located on the top of either side.

TIMBER FOOTINGS

Many pool builders install the filter on a pre-cast concrete slab. This slab is usually smaller than the actual equipment. To provide a suitable footing, the Filter Box Company can supply a H4 rated pre-cut, pre-drilled treated pine footing. This footing can be easily assembled in just minutes with stainless steel bugle batten screws provided and offers a sturdy, dry, and level surface on which one of our acoustic pool filter boxes can be installed. The area within the footing can be filled with blue metal or decorative pebbles, if desired to give a clean dry surface area.

Please check paint colour charts for accurate colour guide